GTO E-Z GATE Скачать руководство пользователя страница 1

Страница: 1 / 36

This product meets and exceeds the requirements of UL 325, the standard which regulates gate

opener safety, as established and made effective March 1, 2000, by Underwriters Laboratories Inc.

3121 Hartsfield Road • Tallahassee, Florida, USA 32303

E-Z GATE/ Mighty Mule/GTO Sales: 1-800-543-GATE (4283) or (850) 575-0176 • Fax (850) 575-8912

or E-Z GATE/ Mighty Mule/GTO Technical Service: 1-800-543-1236 or (850) 575-4144 • Fax (850)575-8950

www.mightymule.com

rev-06.19.12

Printed in China for Gates That Open, LLC.

DUAL GATE OPENER

FM402

and

Installation Manual

WARNING!

This equipment is similar to other gate or door equipment and meets or exceeds

Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has

hazards associated with its use and therefore by installing this product the installer

and user accept full responsibility for following and noting the installation and safety

instructions. Failure to follow installation and safety instructions can result in hazards

developing due to improper assembly. You agree to properly install this product and

that if you fail to do so Gates That Open, LLC, shall in no event be liable for direct,

indirect, incidental, special or consequential damages or loss of profits whether based

in contract tort or any other legal theory during the course of the warranty or at any

time thereafter. The installer and/or user agree to assume responsibility for all liability

and use of this product releasing Gates That Open, LLC, from any and all liability.

If you are not in agreement with this disclaimer or do not feel capable of properly

following all installation and safety instructions you may return this product for full

replacement value.

READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before attempting to

install and use this automatic gate opener. This gate opener produces a high level of

force. Stay clear of the unit while it is operating and exercise caution at all times.

All automatic gate openers are intended for use on

vehicular gates only.

Содержание E-Z GATE





































Результаты поиска

Содержание E-Z GATE

Отзывы:

Похожие инструкции для E-Z GATE

Бренды по названию

Популярные бренды

GTO E-Z GATE, Руководство по установке

Результаты поиска

Содержание E-Z GATE

Отзывы:

Похожие инструкции для E-Z GATE

Бренды по названию

Популярные бренды