GTO E-Z GATE, Руководство по установке

Страница: 21 / 36

rev 06.13.12
11
Install the Closed Position Stop Plates
The closed position stop plate is attached to the FIRST gate to help stabilize the gate leaf in the closed position. An
optional low profile ground stop, when used with the closed position stop plate, provides a secure point for the SECOND
gate to close against.
To further enhance the stability and security of your gate, install an optional automatic gate lock. If you will be using a
gate lock with your gate opener system, the closed position ground stop is required . (Call GTO at 1-800-543-GATE for
more information)
For Pull-to-Open systems, install the closed position stop plates on the inside of the gates .
For Push-to-Open systems, install the closed position stop plates on the outside of the gates.
Step 1
Detach the gate opener arms from the gates and move the gates to the
closed position.
Step 2
Using appropriate hardware for your type of gate (U-bolts for tube or
chain link; screws or bolts for wood or metal) attach the closed position
stop plate (horizontally) about mid-height on the FIRST gate frame. Do
not tighten it completely at this time. Slide the stop plate toward the
frame of the SECOND gate leaf until they touch. Once you have moved
the stop plate to the correct position, tighten
its hardware completely.
Step 3
The low profile ground stop may be made
of metal or concrete and should be firmly
secured in the ground. The low profile ground
stop should be installed beneath the SECOND
gate, positioned near the leading edge.
Closed Position
Stop Plates
CONTROL BOX
Optional Ground Stop
(beneath gate)
FIRST GATE SECOND GATE
Closed Position Stop Plate mounted
horizontally on metal post with U-bolts.
SECOND Gate Frame
FIRST Gate Frame
OVERHEAD VIEW
FACING VIEW
Closed Position
Stop Plates
Low Profile Ground Stop
(not included)
Post Bracket Assembly
Gate Bracket