GTO E-Z GATE, Руководство по установке

Страница: 10 / 36

viii
rev 06.13.12
IMPORTANT SAFETY INSTRUCTIONS
Warning signs (4 enclosed) to be installed on both sides
of each gate (3–5 feet above the bottom of the gate)
!
Product identification label (2)
installed under rear mount of each arm
Control box label (1)
installed on front of the control box
Logo and warning labels (4)
installed on each side of opener housings
GTO DC SWING SERIES
Conforms to UL325
5th Edition Standards
Serial No.
EZDL-
0000000
XXXXXX
Gates That Open, LLC - Tallahassee, Florida USA
9901178
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or play in gate area.
3. This gate is for vehicles only. Pedestrians must use separate entrance.
Maximum Gate: 300 lbs. (136.1 kg); 12 ft. (3.7 m) • Voltage: 12 Vdc;
Frequency: 0Hz; Power: 25W • Class I Vehicular Swing Gate Operator
DUAL GATE OPENER
TO MANUALLY OPEN AND CLOSE THE GATE
1. Turn opener power switch OFF.
2. Disconnect front and rear mount from mounting brackets.
3. Remove opener from mounting brackets and move gate.
Disconnect opener ONLY when the power switch is OFF and
the gate is not moving.
AUTOMATIC GATE OPENER
If any of these signs or warning decals become damaged, illegible or missing, replace them immediately.
Contact GTO at 1-800-543-GATE (4283) for free replacements.