6
ADICOS HOTSPOT-1000
410-2410-001 EN12
PRODUCT DESCRIPTION
3.2 Sensor Specification
Type
Pixels
Capture angle
Object resolution
at a distance
of 5 meters
HOTSPOT-1000
32 x 31
53° x 52°
16 cm
3.3 Applications
3.3.1
Moving Objects
Because of the fast response time of 100 milliseconds, the ADICOS HOTSPOT-1000 is ideal for
monitoring of moving objects, e.g. transport and conveyor belts. Therefore, an early detection
of pockets of ember transported on the conveyors can be realized.
When installing the ADICOS HOTSPOT-1000, it must be ensured that the detector always has
a clear, unobstructed view of the conveyor belt to be monitored. If it is not possible to scan and
monitor the entire moving object with a single ADICOS HOTSPOT-1000, multiple detectors can
be installed to monitor the whole object.
3.3.2 Stationary Objects
In addition to moving objects the HOTSPOT-1000 can monitor stationary objects as well, en-
suring early detection of any hot spots, that may be forming. The detector can be integrated
to observe drives, shaft bearings and reels in order to indicate overheating.
In addition to the ADICOS GSME the HOTSPOT-1000 can be used to monitor bulk material
stored in deposits and silos to detect pockets of ember.
Multiple HOTSPOT-1000 can be operated athe same time and can be combined to one system
to monitor the entire installation and area required.
3.4 Connecting Purge Air
The ADICOS HOTSPOT-1000 optics are integrated in a stainless steel tube, that prevents dust
from collecting on the lens at low air flow. In order to protect the ADICOS HOTSPOT-1000
optics from getting polluted in case of higher air velocity or stronger turbulances, the detector
has a purge air adapter. It ensures, that the optics stay clean even when exposed to direct flow
of dust-loaded air. Both, the integrated IR sensor and the auiliary camera, are equipped with
two 4 mm quick connectors for connection compressed air
Содержание ADICOS HOTSPOT-1000
Страница 36: ......
