GSM S120, Руководство пользователя

Страница: 12 / 23

１１
of 23 Ver 2.0 File No.: S1200020
A Professional GSM Alarm System designer and manufacturer!
GSM SMS Controller Alarm &GSM House Alarm System&
GSM Telemetry Units & GSM GPRS Logging System
05 Intrusion from Guarden Fence Normal
06 Intrusion from Terrace Normal
07 Intrusion from Garage Normal
08 Wired input 8 detector alarm Normal
09 Wired input 9 detector alarm Normal
10 Wired input 10 detector alarm Normal
11 Wired input 11 detector alarm Normal
12 Wired input 12 detector alarm Normal
13 Wired input 13 detector alarm Normal
14 Wired input 14 detector alarm Normal
15 Wired input 15 detector alarm Normal
16 24Hours zone alarm
24-Hour zones, in arm or disarm or stay mode, once the detector in these
zones triggered will alarm immediately.
17 24Hours zone alarm
18 Watchdog alarm
Watchdog Zone,in arm or disarm or stay mode, once the detector in this zone
triggered in the preset time, will not alarm, if the detector hasn’t been
triggered in the preset time, will alarm.
19 Watchdog alarm
20 Tamper Switch
24 Hours zone, NC, the attribute can not be modified. In arm or disarm or
stay mode, once the detector in these zones triggered will alarm immediately.
Notice:
The zone name of wired input 17~20 can not be modified. The attribute of Zone 20 can not be modified.
6.2.2.3 Basic Setting
Notice:
1) The SMS Alert number is for receiving the alarm SMS Message. The Auto-Dial Telephone number is for receiving the calling.
Please help to try adding country code or removing country code when you can not receive the call or SMS. Because of different
GSM Operator with different communication protocols. Our system is with the international communications protocols.
2) The Auto-dial Tel. Number can dial to the S120, 6 tones later, can wiretap the system site. Before 6 tones, if somebody answers
the calling, then can create two-way voice communication. The other telephone number can call in the S120, if nobody answer
1.SMS Phone No.
2. Auto-dial Tel No.
3. Time & Date
4. Sound Alarm
5. Self-Checking
6. Power Failure Alert
7. Arm Delay Time
8. Alarm delay Time
---To setup the SMS Alert Number, must be cell phone numbers, total 3.
---To setup the Auto-dial telephone number, total is 5.
---To setup the time and date information. The Format is Month-Date-Year. Press
Up/Down to setup each item, press * to move to next item.
---Switch on or off the siren when
Alarm occurrence
.
---Setup the Self-Checking Interval Time, Range: 0~240 Hours. Default is 0.
---Enable or Disable the alert function while the AC power is failure.
---Setup the delay time after armed the system by Remote Key or keyboard. Optional:
0S, 20S, 30S, 60S, 90S. Default is 30S.
---Setup the delay time after any sensor triggered. Optional: 0S, 20S, 30S, 60S, 90S.
Default is 20S.