１３
of 23 Ver 2.0 File No.: S1200020
A Professional GSM Alarm System designer and manufacturer!
GSM SMS Controller Alarm &GSM House Alarm System&
GSM Telemetry Units & GSM GPRS Logging System
stay operation, the system will send SMS to the first SMS number.
3) If enable the GSM Jammer Alert function, when the GSM Signal is 0 for more than 90s, the system will drive the siren for 2
minutes and the link-output relay will close 4 minutes.
6.3 Modify the SMS Alert Content of the Zone (Zone or Detector Name)
The S120 accept SMS Command to modify the SMS Alert Content of the zone.
For Wireless Zone Name, the format is:
P#+M+Zone Serial #+New Zone Name+#
, the
Max. Character for the zone name is 32. The Zone Serial Number is 01~16 corresponding to the LCD Menu
and 6.2.2.1 table. If setup successful, the system will return OK to confirm the operation.
E.g.: Modify the first wireless zone name as
Front Door Opened by Intruder!
You should edit a SMS Content:
1234#M01#
Front Door Opened by Intruder!#
,the 1234 is the password. Then send it to the S120 Simcard Number.
For Wired Zone Name, the format is:
P#+Z+Zone Serial #+New Zone Name+#
, the Max.
Character for the zone name is 32. The Zone Serial Number is 01~20 corresponding to the LCD Menu and
6.2.2.2 table. If setup successful, the system will return OK to confirm the operation.
E.g.: Modify the first wired zone name as
Front Door Opened by Intruder!
You should edit a SMS Content:
1234#Z01# Front
Door Opened by Intruder!#
,the 1234 is the password. Then send it to the S120 Simcard Number.
Notice:
The zone name of wired input 17~20 can not be modified.
7. Operating Instructions
Tips!
The user can arm/disarm/Stay (Partial armed) by Remote keys, Keyboard, SMS, also, the user can cancel the alarm by Remote keys,
Keyboard, SMS to Disarm it. Another, the user can switch on or off the independent output relay by SMS Commands.
7.1 Arm or Disarm or Stay (Partial Arm, At House Arm) and Emergency Alarm by remote keys
Press the button “
” on the remote keyor Press Arm button on the keyboard then select Arm, the Control Unit
enters arm status (delay time according to the setting), the
ICON will be on. Under this status, any detector
triggered, the control unit will alarm, if answered the call, the siren will stop and can listen in the alarm area by
phone.
Press the button “
” on the remote control, or press Disarm button on the Keyboard then input the password, the
Control Unit disarms immediately. The
ICON will be off. Under this status, any detector triggered, the control
unit will not alarm. Except the detector type is the 24-Hour Zones or Watchdog zone or SOS zone.
Press the button “
” on the remote keyor Press the Arm button on the keyboard then select Stay, the Control Unit
enters Stay(Partial Armed) status, the
ICON will be on. In this status, the detectors had been set as Stay Type
triggered will alarm, but the detectors had been set as normal Type triggered will not alarm. Please see the menu
of the
Edit RF Zone
.
Press Emergency button (SOS) “
!
” on the
remote key
or the control unit or Press any
Emergency button
. The
Control Unit will enter emergency alarm. The siren will not sound, but will alert the pre-set phone number
immediately.
