GSi VersaLoop, Руководство пользователя, Страница: 31 / 52

Chapter 5: Accessories
Drop through Gate Assembly – Installation
1. Position the drop through gate assembly (A) to the bottom of the non-drive or drive discharge end (B)
in the correct orientation.
2. Install flange bolts (E) and flange nuts (F) to secure the drop through gate assembly (B) to the dis-
charge end (A)spout.
NOTE: Install the drop through gate assembly depending on the application (non-drive end shown
for reference).
Figure 5-5 Installing the drop through gate assembly
A
DBR-080012 8 in. non-drive end assembly
DBR-100019 10 in. non-drive end assembly
B
RSG0912GHILR 8 in. drop through gate assembly
RSG1212GHILR 10 in. drop through gate assembly
C
Flange bolt
D
Flange nut
Pneg-1966 VersaLoop™ 31