GSi VersaLoop, Руководство пользователя, Страница: 27 / 52

5
Accessories
Topics Covered in this Chapter
▪ Hopper – Installation
▪ Discharge Spout – Installation
▪ Discharge with Gate Assembly
▪ Bypass Inlet – Installation
▪ Drop through Gate Assembly – Installation
Hopper – Installation
1. Install the inlet hopper assembly (B or C) to the inlet in drive end (A) or non-drive end in the correct
orientation.
2. Install flange bolts (E) and flange nuts (F) to secure the inlet hopper.
NOTE: Install the inlet hopper depending on the application (drive end shown for reference).
Figure 5-1 Installing the inlet hopper to the drive end
A
Drive end assembly
B
DBR-080048 8 in. standard hopper
DBR-100045 10 in. standard hopper
C
DBR-080052 8 in. angled hopper (used for 30 degree and above)
DBR-100049 10 in. angled hopper (used for 30 degree and above)
E
Flange bolt
F
Flange nut
Pneg-1966 VersaLoop™ 27