Use tweezers to insert pin
Center Differential: Fill the center diff to just above the small bevel gears with GS Racing Pure
Silicone Diff Oil. Rotate the out drive to allow the oil to settle, then if needed, add more oil to bring oil
level just above the small bevel gears. Place the gasket over the diff case, lining up the holes. Place the
center spur gear assembly over the gasket, again lining up the holes. Attach the spur gear assembly
using 3x 10mm FH screws. Tighten the screws
over tighten! Check to make sure the out
disassemble and check for improperly
buggy, for high bite track conditions or for
may try using 10000cps oil.
in a cross pattern until firmly snug, do not
drives rotate smoothly. If there is any binding,
seated parts. After building and driving your
increased power and responsiveness, you
