GS Racing STORM CL-1 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 44

background image

Congratulations on your purchase of the new GS Racing STORM CL-1 Kit. The STORM
CL-1 represents a new generation of 1/8th off road buggies. Using years of experience
and feedback from our race team and staff, we started with a clean sheet of paper and
designed a whole new buggy from the ground up for the serious competition racer.

Please read this manual thoroughly and build the car our way first. The baseline setup is

built into the assembly steps. Taking the time to study, reference, and understand your
STORM CL-1 manual and the building steps included, is the key to ensure the maximum
performance and longevity from your new buggy. Updates, setups, and product news will
be posted on our website, so check often.

As always, if you should ever have any questions or need help with your STORM CL-1,

please feel free to contact our official GS Racing dealers and distributors, as they will be
happy to help you. You may also contact us at any time for the most up to date information

and support.

Good luck and good racing!

«
1
2
3
4
...
»

Содержание STORM CL-1













































Отзывы:

Нет отзывов

Похожие инструкции для STORM CL-1

Бренд: Baghera Страницы: 3

Бренд: Moni Страницы: 7

Бренд: ANSMANN Страницы: 37

Бренд: Carson Страницы: 44

Бренд: Reely Страницы: 140

STUNT CAR STEEL MONSTER

Бренд: Revell Control Страницы: 2

Бренд: REVELL Страницы: 12

Shelby Mustang GT 350 H

Бренд: REVELL Страницы: 11

Бренд: E.T.T. Страницы: 4

Бренд: National Products Страницы: 19

Бренд: National Products Страницы: 20

Trix Trux Hot Rod

Бренд: Tristar Products Страницы: 34

Бренд: Fisher-Price Страницы: 4

Shake N GO! CRACH-UPS L3776

Бренд: Fisher-Price Страницы: 12

Бренд: Fisher-Price Страницы: 28

Бренд: Kyosho Страницы: 37

Бренд: Tameo Kits Страницы: 3

6708L Stampede 4X4 VXL

Бренд: Traxxas Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды