Grunbeck softliQ:SD Series Скачать руководство пользователя страница 7

Страница: 7 / 80

Safety

7 | 80

-B

liQ

-SD

Safety

WARNING:

Contamination of drinking water due to incorrect handling.

● Risk of infectious diseases.

► Have the installation, commissioning and annual maintenance carried out by

specialist installers.

2.1

Safety measures

● Carefully read this manual before operating your product.

● Only operate the product if all components are installed properly.

● Only have persons working on your product who have read and understood

this manual and that are qualified to do such work on account of their vocational
training.

● Keep your product permanently connected to the power and water supply.

● Safety devices must never be removed, bridged or otherwise tampered with.

● Do not operate any products which have a damaged power supply cable. This can

lead to injuries due to electric shock.
Have damaged power supply cables replaced without delay.

● Mains cables may only be replaced by the manufacturer or by authorised

personnel.

● Observe the maintenance intervals (refer to chapter 7). Failure to comply can result

in microbiological contamination of your drinking water installation.

● Children are not allowed to play with the product.

● This product can be used by children over 8 years of age and persons with limited

abilities or lack of experience if they are supervised or instructed in the safe use of
the product and understand the resulting hazards.

● Cleaning and maintenance must not be carried out by children.

Содержание softliQ:SD Series

















































































Результаты поиска

Содержание softliQ:SD Series

Отзывы:

Похожие инструкции для softliQ:SD Series

Бренды по названию

Популярные бренды

Grunbeck softliQ:SD Series, Руководство по эксплуатации

Результаты поиска

Содержание softliQ:SD Series

Отзывы:

Похожие инструкции для softliQ:SD Series

Бренды по названию

Популярные бренды