Grunbeck softliQ:SD Series, Руководство по эксплуатации

Страница: 13 / 80

Product description
13 | 80
B
A
_
T
D3
-B
S
0
0
1
e
n
_
0
1
4
_
so
ft
liQ
-SD
3.3.2 Intelligence of the water softener softliQ:SD
Based on the consumption values of the past 4 weeks, the system capacity is automatically
adjusted to the individual water consumption of the owner / user. SoftliQ water softeners
offer several selection options (= modes of operation). The factory setting is Comfort. In case
of considerable fluctuations in the water consumption, however, it is possible to switch to the
Power mode in the Settings. With low water consumption, Eco offers an energy and
resource-saving option.
The currently setting is displayed in Information menu 1.
A regeneration is triggered daily, if at least 50 % of the current system capacity is used up.
The point of regeneration automatically is placed in a time period where usually no water is
consumed. The point of regeneration can also be set at a fixed time. Should water be
required during the regeneration process, non-softened water is available.
During each regeneration, only the used-up system capacity is regenerated. and only as
much salt is used as necessary. No later than after 4 days without regeneration, the system
releases a complete regeneration, as required by DIN standard 19636-100, for hygienic
reasons.
The intelligence of the softliQ water softener allows for an efficient operation at the lowest
salt and power consumption possible.
3.4 Function
The water softener softliQ:SD offers 5 selections:
●
Comfort (factory-setting)
Optimum use of resources and system output.
●
Eco
Minimum use of resources in case of normal consumption.
●
Power
Maximum performance for highest demands.
●
Individual
To enter your individual user profile.
●
Fix
To enter a permanently fixed capacity figure without looking at the past and
adjusting the capacity figure.