Grunbeck softliQ:SD Series, Руководство по эксплуатации

Страница: 14 / 80

Product description
14 | 80
B
A
_
T
D3
-B
S
0
0
1
e
n
_
0
1
4
_
so
ft
liQ
-SD
3.5 Additional equipment softliQ:SD21 and softliQ:SD23
3.5.1 Salt supply display
Once per regeneration, a light sensor briefly checks the filling level of the regeneration salt.
If the filling level is below the minimum, the control unit provides feedback in the form of a
warning message. This is shown by a yellow symbol in the control unit. The control unit of
the softliQ:SD21 and softliQ:SD23 calculates how many days the salt supply is expected to
last, and shows this value in days in the warning message.
The days the salt supply is expected to last are calculated based on the water consumption
of the past days. In case of fluctuating water consumption, the indicated range of the salt
supply also fluctuates.
3.5.2 Illuminated LED ring
The illuminated LED ring is used as a visual signal in water treatment, operation and fault. In
the standard setting, the illuminated LED ring behaves as follows:
● Is illuminated during water treatment
● Is illuminated during operation of the control unit
● Intermittent flashing in case malfunctions do occur
● Intermittent flashing in case of pre-alarm salt supply
The illuminated LED ring can be set to continuous illumination or be deactivated completely
(refer to chapter 6.2).
3.5.3 Water sensor
The water sensor detects water at the installation location of the softliQ, provides
information via the softliQ control or the Grünbeck myProduct app, and triggers an
audio signal (if activated).
3.6 Product registration
You have the following options to register your product:
● Registration on Grünbeck's website (www.gruenbeck.com).
● Registration using the Grünbeck myProduct app (refer to chapter 6.3).
● Registration via the enclosed postcard.
Registration extends your warranty by 1 year.