Grunbeck softliQ:SD Series, Руководство по эксплуатации

Страница: 50 / 80

Operation
50 | 80
B
A
_
T
D3
-B
S
0
0
1
e
n
_
0
1
4
_
so
ft
liQ
-SD
5. Enter the set value in the control unit.
Menu level>Water hardness
The value is available in the Grünbeck myProduct app.
6.9 Installer level (code 005)
The settings described here may only be made by Grünbeck's technical service /
authorised service company.
Menu level>Information>Installer contact data
1. Touch the button .
2. Enter the code using the numerical keypad.
3. Confirm with
✔
» You can change the parameters and values.
The following parameters and values can be changed:
Menu items Settings / remarks
Wi-Fi access point* Page 1/2 Activate / deactivate
Page 2/2 IP address / SSID / password
Exchanger tank Page 1/2 Flow [l/h]
Capacity figure [m³ x °dH]
Remaining capacity [m³]
Regeneration step
Page 2/2 Regeneration flow rate [l/h]
Last regeneration [date/time]
Above xxx [%]
Flow rates (indication only) Peak flow value [m³/h]
for xxxxx [min.]
Water volumes (indication only) Soft water [m 3 ]
Make-up volume [l]
Counter readings (indication only) Salt consumption [kg]
Regeneration counter
Find reference position start Move to reference position.
Ongoing regenerations are
cancelled. After completion,
the factory setting is activated
again.