Groen Vortex VRC-3E, Руководство по обслуживанию, Страница: 7 / 61

1
Call 1-800/676-9040 for Technical Support
2
2.1 Controls
Operator controls are on the front right of the unit.
The VRC-3E and VRC-6E control panels have the following touch
pads and indicator lights:
• The ON/OFF touch pad gets the Vortex™ ready for use,
or shuts it off.
• The HOLD indicator light shows that the cavity is at holding
temperature.
• The TIMING indicator light stays on when the timer is running.
• The low water probe signals the ADD H20 indicator light to
illuminate when it’s time to add water.
• The open and closed position of the drain valve allows the
unit to be filled with water or drained. This is also used to
manually reset the unit.
• If fitted with an optional water fill drain kit, the high water
probe will automatically control the water level.
• The HI TEMP indicator light comes on when the bottom of
the water reservoir becomes too hot. The unit will
automatically shut off, and cannot be turned on again until
the water reservoir cools down.
• The HI TEMP light will remain illuminated until the controls
are turned on and the unit temperature is low enough to
restart. Then reset the manual reset latch as indicated on the
bottom label.
• When power has been interrupted to the Vortex or the HI
TEMP light has come on, the RESET light will illuminate. The
drain handle will need to be momentarily opened or closed
to extinguish light.
The timer is used in three ways:
1. In the HOLD position the steam generator stays at a low boil
or “holding” temperature. Factory set at 180°F.
2. When a cook time is set, the timing light will illuminate.
The unit steams until the timer runs down to DONE. At that
time steaming stops, the DONE light illuminates and a
beeper sounds.
3. When the timer is turned to the ON position, the unit
steams continuously. The green ON light will stay illuminated.
OPERATION