Groen Vortex VRC-3E, Руководство по обслуживанию, Страница: 12 / 61

3
INSTALLING, CLEANING AND TESTING
Call 1-800/676-9040 for Technical Support
2
Water Connections(s)
No water connection is needed. The water will be poured directly
into the water cavity reservoir. Avoid the use of any chemically
treated water, specifically filtered water.Instructions for connect-
ing the optional auto-fill drain kit are included with the kit. Also,
in the Assembly/Disassembly section of the manual.
Drain Connection
The Vortex® Connectionless Steamer should be manually
drained to the bottom containment pan supplied by the factory.
If the unit is connected to a drain, do not connect more than
two units to one drain line or pressure from one unit will effect
the second unit.
Steam Vent Assembly Instructions
Remove steam diverter assembly from literature bag which can
be found inside unit. Slide loose end as shown over unit steam
outlet, tighten worm gear clamp with flat head screw driver.
Be sure steam outlet is pointing in the upward position.
(Shown below)
Stacking Units Instructions
Remove drain containment pan from the bottom of unit(s).
Unscrew to remove adjustable legs from base of Vortex unit(s).
Unfasten nuts and bolts on stand platform(s). Place Vortex
unit(s) on stand platform. Align the (4) leg holes with the holes
in the platform. Secure Vortex units(s) to stand platform(s) using
bolts and washers provided with stand, see drawing below.
For double stack units only:
By loosening the left screw and removing the right screw provided,
mount steam exhaust bracket assembly to the back panel of the
top Vortex unit as shown in detail “B” of Figure 1 on the next
page. Attach the steam exhaust hose from the bottom Vortex
unit’s steam outlet tube to the top Vortex unit’s steam exhaust
bracket assembly using hose clamps provided as shown in figure
2 on the next page. (Note: Steam exhaust hose may need to be
cut to fit.)
FIGURE 1
FIGURE 2
DETAIL B
SCALE 1 : 1
DOUBLE
STACK
STAND P/N
142363
HOSE
CLAMPS
P/N 073259
HOSE
CLAMPS
P/N 073259
DOUBLE STACK
STEAM
EXHAUST HOSE
DOUBLE STACK
STEAM EXHAUST
BRACKET
ASSEMBLY
P/N 143243
10-32 SCREW
P/N 004173