
Model T1243 (Mfd. Since 02/18)
-15-
G1075—58-Pc. Clamping Kit
1
⁄
2
" T-Nut
G1076—58-Pc. Clamping Kit
5
⁄
8
" T-Nut
This clamping kit includes 24 studs, 6 step-block
pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts, and
6 end hold-downs. The rack is slotted so it can be
mounted close to the machine for easy access.
Figure 22. G1076 58-Pc. Clamping Kit.
G9629—Universal Indicator Holder
Mount your test indicator right on your mill for
guaranteed accurate readings. C-frame holder
mounts with a single screw directly on the quill
and does not interfere with the cutting tool.
Clamping diameter is 1
7
⁄
8
". The length from the
clamping bracket to the indicator is 4
1
⁄
2
". Suitable
for all popular indicators with a
5
⁄
32
" shank.
Figure 24. G9629 Universal Indicator Holder.
H2939—4-Pc. Edge Finder Set
This is a must have set for any shop. 4 different
styles to cover any setup problem! Set includes 1
each:
3
⁄
8
" diameter with point,
3
⁄
8
" dia. combination
with a point and .200" shoulder,
1
⁄
2
" dia. with a
point, and
1
⁄
2
" dia. with .200" shoulder.
Figure 23. H2939 4-Pc. Edge Finder Set.
Figure 25. Selection of test indicators.
G9610—Test Indicator
0.030
" Range/0.001" Resolution
G9611—Test Indicator
0.008" Range/0.0001" Resolution
G9612—Test Indicator
0.030" Range/0.0005" Resolution
These test indicators have an easy to read dial
and a pivoting stylus that moves at right angles to
the dial face.
order online at
www.grizzly.com
or call
1-800-523-4777