Grizzly T1243 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 28

Grizzly T1243 Скачать руководство пользователя страница 16

-14-

Model T1243 (Mfd. Since 02/18)

SECTION 4: ACCESSORIES

ACCESSORIES

Installing unapproved accessories may

cause machine to malfunction, resulting in

serious personal injury or machine damage.

To reduce this risk, only install accessories

recommended for this machine by Grizzly.

NOTICE

Refer to our website or latest catalog for

additional recommended accessories.

order online at

www.grizzly.com

or call

1-800-523-4777

G9640— 90° Wide-Base Square 3" x 5"

G9641— 90° Wide-Base Square 4" x 6"

G9642— 90° Wide-Base Square 5" x 8"
Grade 0, heavy-duty stainless steel 90° precision
squares feature wide bases for stability. Perfect
for all setup and inspection work.

Figure 20. 90° Precision wide-base square.

H7978—Fractional Digital Caliper
Large  LCD  readout  converts  to  decimal  inch,
fractional  inch  and  millimeters  with  the  push  of
a  button.  Measure  internal,  external  dimensions,
depth,  steps  and  differential  measurements.
Features thumb roll and stainless steel construc-
tion. Range: 0-6", 0-150mm. Resolution: 0.0005",
0.01mm,

1

⁄

128

".

Figure 21. H7978 6" Digital Caliper.

T24804—1" Universal Dial with Magnetic Base
Includes iGaging dial indicator, fine adjustment
magnetic base, and a protective case. Dial indica-
tor has a range of 0–1", with an accuracy of within
0.001". Fine adjustment magnetic base is a strong
magnet with 85 lbs. of pull power and a V-shaped
bottom so the base can be mounted at any angle.

Figure 19. T24804 Universal Dial with Magnetic

Base.

«
...
14
15
16
17
18
...
»

Содержание T1243





























Отзывы:

Нет отзывов