manualshive.com logo in svg

Grizzly G0817, Руководство пользователя, Страница: 9 / 88

Поделиться
Скачать
Grizzly G0817 Скачать руководство пользователя страница 9

Model G0817 (Mfd. Since 05/16)

-7-

Machine Data Sheet

The information contained herein is deemed accurate as of 12/12/2016 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0817

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0817 SUPER HEAVY‐DUTY 14" RESAW BANDSAW

WITH FOOT BRAKE

Product Dimensions:

Weight.............................................................................................................................................................. 319 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 29 x 32-1/2 x 76 in.

Footprint (Length x Width)............................................................................................................................ 24 x 18 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 388 lbs.

Length x Width x Height....................................................................................................................... 30 x 24 x 79 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement.............................................................................................. 110V or 220V, Single-Phase, 60Hz

Prewired Voltage.................................................................................................................................................. 110V

Full-Load Current Rating.................................................................................................... 15A at 110V, 7.5A at 220V

Minimum Circuit Size.......................................................................................................... 20A at 110V, 15A at 220V

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 14 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 5-15

Recommended Plug Type...................................................................................................................... 6-15 for 220V

Switch Type......................................................................... ON/OFF Push Button Switch w/Emergency Stop Paddle

Motors:

Main

Type................................................................................................................. TEFC Capacitor-Start Induction

Horsepower................................................................................................................................................ 2 HP

Phase............................................................................................................................................ Single-Phase

Amps.................................................................................................................................................... 15A/7.5A

Speed................................................................................................................................................ 1720 RPM

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Main Specifications:

Main Specifications

Bandsaw Size............................................................................................................................................ 14 in.

Max Cutting Width (Left of Blade)........................................................................................................ 13-1/2 in.

Max Cutting Width (Left of Blade) w/Fence............................................................................................... 12 in.

Max Cutting Height (Resaw Height).......................................................................................................... 14 in.

Blade Speeds..................................................................................................................................... 2820 FPM

Содержание G0817

























































































Отзывы:

Нет отзывов