Grizzly G0812, Руководство пользователя

Страница: 48 / 84

-46-
Model G0812 (Mfd. Since 2/16)
5. Remove fill cap (see Figure 72), then remove
drain plug and allow tank to empty into drain
pan.
Figure 72. Drain plug and fill cap location.
Fill Cap
Drain Plug
10. Wipe out as much residual fluid and con-
taminants from tank as possible. We highly
recommend that tank be cleaned out with
pressure washer or steam cleaner and fully
dried with compressed air for best results.
11. Re-install tank lid and screen.
12. Replace drain plug, then fill tank approxi-
mately 80 percent full with 3.17 quarts of ISO
32 or equivalent hydraulic fluid.
13. Re-install tank fill cap and front access panel.
6. Clean fill cap with mineral spirits and allow to
air dry.
7. Clean tank screen (see Figure 73) with min-
eral spirits and blow dry with compressed air.
8. Inspect screen (see Figure 73) and tank fill
cap for any holes, and replace if any damage
exists.
Figure 73.
Hydraulic fluid tank lid removed to
access for cleaning.
Tank Screen
9. Open tank by removing hex bolts that secure
lid (see
Figure 73).
Tank
Lid