manualshive.com logo in svg

Grizzly G0806, Руководство пользователя, Страница: 9 / 80

Поделиться
Скачать
Grizzly G0806 Скачать руководство пользователя страница 9

Model G0806/G0807 (Mfd. Since 12/15)

-7-

The information contained herein is deemed accurate as of 7/6/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0807

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0807 18" VARIABLE‐SPEED VERTICAL METAL‐

CUTTING BANDSAW

Product Dimensions:

Weight.............................................................................................................................................................. 803 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................ 40-1/2 x 21-1/4 x 73-1/2 in.

Footprint (Length x Width)..................................................................................................................... 16-1/2 x 34 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 999 lbs.

Length x Width x Height....................................................................................................................... 84 x 46 x 29 in.

Electrical:

Power Requirement.............................................................................................. 110V or 220V, Single-Phase, 60Hz

Prewired Voltage.................................................................................................................................................. 220V

Full-Load Current Rating................................................................................................. 19.6A at 110V, 9.5A at 220V

Minimum Circuit Size.......................................................................................................... 30A at 110V, 15A at 220V

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length........................................................................................................................................ 12-1/2 ft.

Power Cord Gauge......................................................................................................................................... 12 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 6-15

Switch Type.................................................................................................... Magnetic Switch w/Overload Protection

Motors:

Main

Type................................................................................................................. TEFC Capacitor-Start Induction

Horsepower................................................................................................................................................ 2 HP

Phase............................................................................................................................................ Single-Phase

Amps.................................................................................................................................................... 19A/9.5A

Speed................................................................................................................................................ 1720 RPM

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Grinder

Type................................................................................................................. ODP Permanent-Split Capacitor

Horsepower............................................................................................................................................. 1/8 HP

Phase............................................................................................................................................ Single-Phase

Amps........................................................................................................................................................... 0.6A

Speed................................................................................................................................................ 3600 RPM

Power Transfer ............................................................................................................................... Direct Drive

Bearings........................................................................................................ Sealed & Permanently Lubricated

Содержание G0806

















































































Отзывы:

Нет отзывов