Grizzly G0679, Руководство пользователя

Страница: 39 / 56

g0679 stroke/Edge sander
-37-
figure 62.
Wear pin adjustment.
Table Elevation Wear
pin Adjustment
the table travels vertically along the table eleva-
tion ways. a series of wear pins reduce friction
between the table brackets and elevation ways,
making it easier to move the table up and down.
over time, these pins will wear, resulting in slop
between the table brackets and elevation ways.
to compensate for this wear, the wear pins can
be adjusted.
Tools Needed Qty
Wrench 14mm ................................................... 1
To adjust the wear pins:
1. disConnECt sandEr FroM poWEr!
2. loosen the jam nut shown in ( figure 62 ).
3.
tighten the hex bolt until you just begin to
feel resistance.
—the goal is to position the wear pins
against the ways without applying pressure
to the them. the ideal setting will allow
easy, slop-free horizontal movement of the
table.
4. When you are satisfied with the positioning
of the hex bolt, keep it from turning and fully
tighten the jam nut.
5. repeat Steps 2–4 with the remaining seven
wear pins.
Jam nut
hex Bolt