Grizzly G0679, Руководство пользователя

Страница: 4 / 56

-2-
g0679 stroke/Edge sander
iNTRODucTiON
We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
C
/
o
technical documentation Manager
p.o. Box 2069
Bellingham, Wa 98227-2069
Email: manuals@grizzly.com
contact info
the Model g0679 stroke/Edge sander is used
to sand large workpieces such as tabletops or
doors. For maximum versatility, the belt assembly
pivots from horizontal to vertical to allow for edge
sanding. When in the horizontal position, the
platen press is used to apply sanding pressure to
the workpiece and when in the vertical position,
the workpiece is pressed into the belt to apply
sanding pressure.
to use the sander in the stroke sanding mode,
the user locks the belt assembly in the horizontal
position, then places the workpiece on the table
and raises the table until the workpiece is within
1
⁄
4
" of the belt. the user positions the workstops
as necessary to ensure workpiece stability, then
turns the machine
ON . the user grasps the table
handle with one hand and the platen press handle
with the other, then applies pressure by pulling
the platen press handle downward while sliding
the handle back-and-forth along the entire length
of the workpiece. to sand the full width of the
workpiece, the user moves the table forward-and-
backward.
to use the sander in the edge sanding mode,
the user adjusts the belt assembly to the desired
angle, locks it in place, then opens the belt cover
to expose the belt. the user raises the table until
it is even with the center portion of the belt, then
places the workpiece on the table and positions
the workstops as necessary to ensure workpiece
stability. the machine is turned
ON , and the user
moves the workpiece into the belt to perform the
sanding operation.
functional Overview Manual Accuracy
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings, and
photographs of the machine we used when writ-
ing this manual. however, sometimes errors do
happen and we apologize for them.
also, owing to our policy of continuous improve-
ment,
your machine may not exactly match
the manual
. if you find this to be the case, and
the difference between the manual and machine
leaves you in doubt, immediately call our techni-
cal support for updates or clarification.
For your convenience, we always keep current
grizzly manuals and most updates available on
our website at
www.grizzly.com . any updates to
your machine will be reflected in these documents
as soon as they are complete. Visit our site often
to check for the latest updates!