Grizzly G0679, Руководство пользователя

Страница: 26 / 56

-24-
g0679 stroke/Edge sander
horizontal Table Movement
horizontal table movement is used together with
the platen press movement to allow complete
sanding of workpieces with large surface areas.
horizontal table movement can be locked when
table movement is not desired.
1.
Make sure the horizontal table travel locks
are released by rotating them counterclock-
wise until the table moves freely (
figure
38 ).
Workstops
the Model g0679 is equipped with two workstop
mechanisms. the table workstop is used on
workpieces that fit entirely on the table and the
auxiliary workstops are used on workpieces that
are larger than the table.
Make sure the workstops are positioned to secure
the workpiece against the direction of the belt.
• When the sander is in the stroke sanding
mode, the workstops must be placed on the
left side of the machine.
• When the sander is in edge sanding mode,
the work stops must be placed on the right
side of the machine.
Table Workstop
1.
loosen the flange bolts that hold the work-
stop to the table ( figure 39 ).
—if the workstop must be repositioned to
the other side of the machine, remove the
flange bolts completely and relocate the
work stop as needed, then re-thread the
flange bolts into the appropriate holes.
The belt speed on the Model G0679 is 3600
fpM, or over 40 Mph. A workpiece ejected
at this speed could cause serious personal
injury and property damage. Always use the
workstops and be sure they are in the cor-
rect position and secured before using the
machine.
figure 39.
Table workstop.
Workstop
Flange Bolt
2. push or pull the table handle to move the
table forward and backward.
Note:
To lock the horizontal table move-
ment, turn the table travel locks
1
⁄
3
of a turn
clockwise. To release the horizontal table
movement, turn the table travel locks
1
⁄
3
of a
turn counterclockwise. Be careful not to over-
tighten the lock handles. Doing so may cause
damage to the machine.
figure 38.
Horizontal table movement.
table
handle
horizontal table locks