Grizzly G0679, Руководство пользователя

Страница: 33 / 56

g0679 stroke/Edge sander
-31-
SEcTiON 6: MAiNTENANcE
Always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily check:
• loose mounting bolts.
• Worn or damaged sanding belt.
• Worn or damaged wires.
• any other unsafe condition.
Weekly Maintenance:
• grease table elevation ways.
• grease belt tension leadscrew.
• oil table elevation chain.
• Clean/grease hold down shaft.
Every 500 hours:
• refill table elevation gearbox.
Schedule
Cleaning the Model g0679 is relatively easy.
Vacuum sawdust, and wipe off the remaining dust
with a dry cloth. if any resin has built up, use a
resin dissolving cleaner to remove it.
cleaning
lubrication for the Model g0679 consists of
greasing the table elevation ways, and belt ten-
sion leadscrew, oiling the table elevation chain,
and refilling the table elevation gearbox.
Table Elevation Ways
Clean the table elevation ways with mineral spirits
and a rag or brush to remove any grime. dry the
ways, then brush on a thin coat of light multi-pur-
pose grease. use the table elevation handwheel
to move the table up and down several times to
disperse the grease (
figure 55
).
Lubrication
figure 55.
Table elevation ways.
table Elevation Ways