36
English
B.
Rotate the projector until the desired position is reached
and fix the yoke by tightening the screw
“20”
.
C.
After the lamp replacement put the projector in its original position and fix the yoke.
7.3 Lamp installation
A.
Untighten the 2 screws
"21"
and incline the ballast
group.
21
Attention!
Disconnect the unit from mains supply before servicing it or performing any other action.
The lamp is very hot during operations! Wait at least for 20 minutes before changing.
Warning!
Hold the ballast group,
in order to avoid that it will open too abruptly.
