12.5cm
11.5cm
12mm
12V
W
CW
B
R
G
12V
W
CW
B
R
G
12V
W
CW
B
R
G
12V
W
CW
B
R
G
12V
W
CW
B
R
G
R
G
B
CW
WW
W
CT
+
CT
-
3m
≥5m
3m
120°
1.5cm
7cm
3cm
2700K
6500K
CCT+/-
Random Mode
Selector button
ON/OFF Button
Static monochrome
buttons
(15 colour choices)
Dimming buttons
Switch back and forth
2 different colours
User Instructions
Please read these instructions and retain them for future reference.
Important information
It is recommended that the strips are installed by a qualified
electrician ensuring the installation complies with current IEE
wiring regulations & local building control.
These products are designed for connection to a 220-240V
mains supply.
• Input: 220-240 V/AC, 50/60 Hz
• Output Voltage: DC 12V
• Power: 4.8W/m
• Adapter: DC 12V, 2A, 24W
• Length: 5m
• Strip Width: 12mm
• IP Rating: IP65
• Silicone Gel coating
• Self-adhesive Tape for Easy Installation
Specifications:
Package Contains:
• 1 x 5m Reel of Self-adhesive Tape
• 1 x 12V/DC UK Power Adaptor
• 1 x WiFi Smart Controller
• 1 x 24 Key Remote Control
• Cut to size in 10cm intervals
• 30 x 3 LEDs/m (RGB+W+WW)
• Luminous Flux: 400-450lm/m
• RGB & CCT (2700-6500K) full control
• Dimmable through the APP
• Control Type: Remote and APP
• App Control: 2.4Ghz WiFi using Smart Life APP
• Compatible with Amazon Alexa & Google Home
0
0
• Working Temperature: -25 C~40 C
SCAN THE QR CODE
to download the APP
or search "
Smart Life
"
on your App Store
or Android Market
by Mobile Phone.
Dimensions:
LTTP5WIFI
Smart Wi-Fi LED Strip 5m kit
RGB & CCT (2700K-6500K)
Installation:
1.
Precautions:
• Ensure the installation surface is clear of dirt or dust and clean it thoroughly before use.
• Do not twist the LED strip
0
• The LED strip has excellent flexibility but requires the bending to be over 60 and the diameter
to be no smaller than 30 mm. All bends need to sweep round, do not use sharp corners (Fig. 1).
CAUTION
– Twisting, pressing on LEDs, over-bending the strip, cutting at non-cut points,
incorrectly powering the strip will invalidate the warranty.
IR Remote Control Functions:
3.
Tape fitting:
• Remove the self-adhesive backing tape from the strip gradually during installation.
Do not remove it all at once to avoid the strip becoming entangled and sticking to itself.
• Stick the LED strip to the mounting surface by pressing on the strip (Fig. 3).
4. Connect the tape to the supplied adaptor and plug in.
5. Control the tape using the phone APP (see next page for instructions) or the IR remote control.
2.
Cutting the tape:
• Unplug the power supply before cutting.
• Measure the tape needed and use sharp scissors to cut it at the marked 10cm intervals (Fig. 2).
Fig. 1
Fig. 2
Fig. 3
● Control Distance: up to 6m
● Random Mode selector button
● Brightness and speed adjustments
● Battery Type: CR2025 (included)
● Replacing the Battery:
150cm
500cm
10cm
90LEDs/m
