Package Contents
Warnings and Cautions
1of2
Assembly Instruction Sheet #IS-GLV8406MB
For Style GLV8406MB
2017 QuoizelInc.
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
A
Crossbar Assembly
x 1
Please go to
for product cleaning tips. Go to the
selection.
(1) A19 Medium Base bulb 100W Maximum or
(1) Medium Base Vintage Bulb is recommended but not supplied.
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
www.quoizel.com
Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Fixture can only be mounted in the direction indicated on page 2.
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
C
Fixture Body
x 1
ReleasedDate:2017-11-01
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
D
Glass Panel
x 4
E
Cage
x 1
B
Alternate
Mounting
screw
x 2
STEP 1
Attach the Glass Panels to the Cage
-
A. Remove Allen screws and tabs from the top edge of the Cage (E).
B. Insert Glass Panels (D) into the slot in the bottom edge of the Cage
(E). Place tabs onto the top edge of Glass Panels (D) and align holes
on tabs to mounting holes on the top edge of the Cage (E). Secure by
threading Allen screws back into the Cage (E). Hand tighten until
snug with screwdrivers.
Allen Screw
Tab
D
E
Slot
Figure 1
STEP 2
Install the Bulb and
the Cage
-
A. Remove lock screws from the
fixture hood.
B. Insert the bulb onto the
socket and screw snugly into
place.
C. Attach the fixture hood of the
Fixture Body (C) onto the top
edge of the Cage (E) with one
gap on the Cage (E) against
the backplate and align other
gaps to the side of the fixture
hood. Secure with
lock screws.
Tighten until snug with
screwdrivers.
D. Rotate the curve metal until it
is just on the top of the
Fixture Body (C).
previously
removed
Curve
Metal
C
Vintage Bulb
(recommended
but not supplied)
Socket
E
Lock Screw
Figure 2
STEP 3
Installing the Crossbar Assembly
-
A. Pass the supply wires through the Crossbar Assembly (A). Attach
the Crossbar Assembly (A) to the Outlet Box with the head of the
Green Ground Screw facing you. Secure the Crossbar Assembly (A)
with Outlet Box Screws (not included). Tighten until snug
Note: Use the Alternate Shorter Mounting Screw (B) if your
installation requires a shorter mounting screw.
.
Supply Wires
with Ground Wire
Outlet Box Screws
(not included)
Outlet
Box
A
Figure 3
Mounting Screw
or Alternate Short
Mounting Screw
Gap
Backplate
