9.1 DMX channels
Each unit use
7
DMX channels.
In case of more units, the first unit will be set with address 001, the second unit with address 008, the third unit with
address 015, etc.
9.2 Setting DMX address
Follow this description to modify the address: press once the “MENU” button, select “ADR” and press “ENTER” but-
ton to activate the function. Then select the desired value (between 1 and 512 ) through the “UP” and “DOWN”
keys. Press “ENTER” to confirm.
9.3 DMX functions
9.4 DMX signal interruption
In the absence of DMX lamp and motors remain in the set state last received DMX.
After 5 minutes the lamp is controlled based on the parameter of the MAN function in the menu LMP.
9.5 Lamp management by DMX signal
In the presence of DMX, the lamp is turned on:
• Via the 1st channel dmx if the function MAN of the menu LMP is OFF
• Always, if the function MAN of the menu LMP is ON
In the absence of DMX, the lamp is turned on if the function MAN of the menu LMP is ON, otherwise it is off.
To turn off the lamp via DMX you need to stay at least 4 seconds in the 0-63 area of the DMX channel 1.
To turn on the lamp, allow at least 20 s after switching off.
9.0 DMX function mode
Channel Function
Value
Description
1
Lamp
0-63
Lamp OFF
64-127
Reset
128-255
Lamp ON
2
Blackout
Strobe
0-5
Shutter closed
6-127
Proportional control 0-100% of the mechanical shutter
128-159
Shutter open
160-239
Proportional control 0-100% of the strobe effect
240-255
Shutter open
3
Yellow
0-255
Proportional control 0-100% of the Yellow colour
4
Cyan
0-255
Proportional control 0-100% of the Cyan colour
5
Magenta
0-255
Proportional control 0-100% of the of Magenta colour
6
Zoom
0-255
Proportional control 0-100% of the Zoom movement
7
Frost
0-128
Frost filter OFF
129-255
Frost filter ON
