GRAUPNER mz-32 HoTT, Руководство пользователя

Страница: 24 / 48

24 / 48 S1024.mz32_V1.7_sh_en
Keys to the le ŌŽĨƚŚĞĚŝƐƉů ay
Hereina Ō er referred to as upper, center and low ĞƌƐĞůĞĐƟŽŶ keys.
These keys are used to scroll through lists, columns, etc., in the same
way as their arrow dir
ĞĐƟŽŶƐ͘
ͻ >ŽŐĨƵŶĐƟŽŶ
Pressing the lower le Ō bu Ʃ on for about one second switches the
n g i s s a o s l a n a c u o Y . F F O r o N O r e t t i m s n a r t e h t f o n o i t c n u f g n i g g o l
your own key combina
ƟŽŶ to switch data logging ON or OFF.
Keys to the right of the display
ͻ Upper Key
Switches between "Servo display" and las ƚĂĐƟ v ĞŵĞŶƵƉŽƐŝƟŽŶ
ͻ Center Key
Switches between the "ASCII" screen of the telemetry menu and
las
ƚĂĐƟ v ĞŵĞŶƵƉŽƐŝƟŽŶ
ͻ Lower Key
Switches betw ĞĞŶĂĐƟ ve widgets deck and las ƚĂĐƟ ve menu
Screen lock
In the basic display of the transmi Ʃ er, the input lock of the screen is
ĂĐƟ vated by pressing the two lower ƐĞůĞĐƟŽŶ keys simultaneously
for approx. 1 second.
ͻ The ke LJůŽĐŬĨƵŶĐƟŽŶ is displayed by a lock symbol. The controls
remain opera ƟŽŶĂů͘
ͻ Pushing the two lower ƐĞůĞĐƟŽŶ bu Ʃ ons again for approx. 1 sec-
ond releases the lock again.
Output Swap
Since the transmission of the control channels to the receiver is op Ɵ -
mized on the transmi Ʃ er side, taking into account the model-spe-
ĐŝĮĐ requirements and channels used, all required control channels
/ outputs must be correspondingly assigned in the “Output Swap”
menu.
This assignment occurs automa
Ɵ cally during the crea ƟŽŶ of a model
memory and as a result of a manual renaming of the required servo
outputs in the submenu “Servo Set” of the basic menu.
Used but not renamed accordingly control channels / outputs are
therefore possibly in this menu either assigned manually or by tap-
ping the symbol on the top of the display, the display “Auto Map-
ping” appears and then an automa
ƟĐ assignment is triggered by tap-
ƉŝŶŐƚŚĞďůƵĞĮĞůĚ͘