GRAUPNER mz-32 HoTT, Руководство пользователя

Страница: 38 / 48

38 / 48 S1024.mz32_V1.7_sh_en
Digital switch
As men ƟŽŶĞĚ earlier in the ƐĞĐƟŽŶ “Opera ƟŽŶ and menu ĨƵŶĐƟŽŶƐ ”,
the transmi Ʃ er mz-32 HoTT over 64 digital switches. Details can be
found in the men ƟŽŶĞĚƐĞĐƟŽŶ͘
On the receiver side, these digital switches can be assigned to the
r
ĞƐƉĞĐƟ vely desired switching channel both in the submenu “RF
Con ĮŐ .” of the basic menu and in the submenu “Se ƫŶŐ and data
view” of the “Telemetry” menu.
Notes
ͻ This ĨƵŶĐƟŽŶ is only available for selected receivers with current
Įƌ mware.
ͻ In order to avoid ŵĂůĨƵŶĐƟŽŶŝŶŐ when assigning the digital
switches, only the r ĞƐƉĞĐƟ vely a ī ected receiver may be in oper-
a ƟŽŶĚƵƌŝŶŐƚŚĞŝƌĂƐƐŝŐŶŵĞ nt.
Assign digital switch step-by-step
1. Commission the desired receiver ĂŶĚ͕ if necessary ͕ switch Žī any
other receivers or otherwise shut them down.
2. Switch to the “SETTING & DATAVIEW” submenu of the telemetry
menu.
3. Use the righ ƚƐĞůĞĐƟŽŶŬ ey to switch to the “RX FAIL SAVE” page.
4. In the “OUTPUT CH” ůŝŶĞ͕ if necessary ͕ select the receiver output
to be switched as described under “F ƵŶĐƟŽŶ of the cross-shaped
Ŭ eypad”.
-
In the ĮŐƵƌĞ on the ůĞŌ͕ this ŝƐ͕ for ex ĂŵƉůĞ͕ the receiver con-
ŶĞĐƟŽŶ 10 of the HoTT receiver currently ĚĞĮŶĞĚ as a telem-
etry receiver.
5. Change to the “INPUT CH” line.
6. Press the middle ENTER
Ŭ ey t ŽĂĐƟǀĂ t ĞƚŚĞǀĂůƵĞĮĞůĚ͘
dŚĞǀĂůƵĞĮĞůĚŝƐĚŝƐƉůĂLJĞĚŝ nverted:
7. Select the desired digital switch.
-
/ŶƚŚĞƉŝĐƚƵƌĞŽŶƚŚĞůĞŌƚŚŝƐŝƐ for example “D01”.
8. Press the middle ENTER Ŭ ey to complete the process.
dŚĞǀĂůƵĞĮĞůĚŝƐĂŐĂŝŶĚŝƐƉůĂLJĞĚĂƐ “normal”.
9. Eventually use the same procedure with the assignment of fur-
ther switches.