GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler 11/2008
63
Graupner
Order No.
9594
INSTRUCTIONS
Heinkel He 111
For electric power system and 3 LiPo cells
or
two OS MAX 25 FX
This model requires a six-function radio control system
Specification
Wingspan approx.
1750 mm
Overall length approx.
1280 mm
Wing section
symm. 17%
Tailplane section
symm. 7%
Wing area approx.
48 dm²
Tailplane area approx.
6.6 dm²
All-up weight according to
fittings min. approx.
3000 g
Longitudinal dihedral approx.
0.5° - 1°
Centre of Gravity range, measured
from the root leading edge, approx.
140 mm
Introduction
At the design stage we placed particular emphasis on low take-off weight, and this is
reflected in the model’s excellent performance and flight handling. The Heinkel He
111’s flying characteristics are nicely balanced, and the aeroplane is even capable of
simple aerobatic manoeuvres. The model is primarily of balsa construction, with
plywood reinforcements at highly stressed areas.
The fuselage, wing panels, fin and tailplane are supplied ready-built, and covered in
two-colour iron-on film. To complete the model the builder is required to carry out
very little work, which includes fitting the tail panels, installing the motor mounts and
motors, undercarriage, receiving system and control surface linkages.
A six-function radio control system is sufficient to fly the model.
Caution:
this model is not a toy!
If you are a beginner to this type of powered model, please ask an experienced
model flyer for help and support. If you attempt to operate the model without knowing
what you are doing, you could easily injure yourself or somebody else. Please keep
your safety and well-being in mind at all times.
Important Safety Notes
You have acquired a kit which can be assembled into a fully working RC model when
fitted out with suitable accessories. However, we as manufacturers have no control
