GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler 11/2008
71
Please see the main GRAUPNER FS catalogue for details of suitable battery
chargers.
Electric power system and accessories
2 COMPACT 400 Z 11.1 V
Order No. 7745
2 BRUSHLESS CONTROL 45 speed controller
Order No. 7235
1 Distributor lead
Order No. 2969V
1 LiPo flight battery
Order No. 7664.3
1 ELEKTRO PROP propeller
Order No. 1328.18.12,5
1 ELEKTRO PROP propeller
Order No. 1328.18.12,5L
1 Velcro cable tie
Order No. 1587
Glowplug motors and accessories
Motor
Capacity
Silencer
Propeller
Glowplug
Order No.
cc
Order No.
Order No.
Order No.
OS MAX 25 FX
4.07
1828.33
1316.23.15
1682
1870
This model requires two of each item stated in the table.
The model is extremely highly pre-fabricated, and is built to a superb standard of
quality. The kit includes GRP cowls and engine nacelles as standard. Please check
first that the covering film is stuck down all round, and run a film iron along the seams
if you are not sure. This applies in particular to hinge slots and film overlaps. We
recommend that you apply clear adhesive tape over the faces into which the control
surface hinges are to be fitted, because moisture tends to creep under the film at
such areas, causing it to lift.
Materials and tools required
Twist drill, 1.5 mm Ø
e.g. Order No. 574.1,5
Twist drill, 2.0 mm Ø
e.g. Order No. 574.2
Cross-point / slot-head screwdriver
Allen-tip screwdriver
e.g. Order No. 5735.1,5 and 5735.2,0
Flat-nose pliers
Side-cutters
Adhesives
White glue, e.g. UHU coll, Order No. 958.60
UHU hart, e.g. Order No. 534.10
Low-viscosity cyano-acrylate (“thin cyano”), e.g. Order No. 5822
Assembling the Heinkel He 111
Please don’t start building the model until you have examined the components and
studied the individual stages of construction, so that you have a clear understanding
how it goes together. If you are not satisfied with any component, take it back to your
supplier (model shop) before carrying out any work on it.
