4-7
IMPORTANT
Notes on the printer driver settings and the printing quality.
If "Speed Precedence" has been selected as shown in <Printer driver setting
"Speed Precedence"> below, depending on the type of data and the paper used,
the printing may be a little uneven in places.
<Printer driver setting "Speed Precedence">
• [Base Setting] tab > "Print quality" > "High-speed"
• [Base Setting] tab > "Speed precedence" > "Checkbox checked"
In these cases, since speed takes precedence during printing, the printing quality
may be a little coarse, making it suitable for check prints only.
To even out the printing, make the "Speed Precedence" settings shown below
and then perform printing.
<Printer driver setting "Speed Precedence">
• [Base Setting] tab > "Print quality" > "High quality" or "Normal"
• [Base Setting] tab > "Speed precedence" > "Checkbox unchecked"
If satisfactory image quality cannot be obtained even after making the above
settings, perform print head
*1
and maintenance station
*2
cleaning.
If the printer is used as is, there is a risk of shortening the life of the print heads.
Do not continue to use the printer in this status.
*1 Print head cleaning
(See Section 5.3, "Print Head Cleaning and Alignment" in this manual.)
*2 Maintenance station cleaning
(See Section 5.7, "Cleaning the Maintenance Station" in this manual.)
