5-25
Turning off the printer, and removing the cables
1. Press the printer's [POWER] button to turn off the printer.
Check that the [POWER] button LED is extinguished.
2. Remove the power cable and the USB cable.
Removing the Print Heads
3. Open the maintenance cover at the left-hand side of the printer.
4. Remove the print heads (black and color).
5. Lower the joint block and then press on it to lock it in place.
6. Close the maintenance cover.
7. Store the removed print heads in plastic bags or similar containers.
Removing the ink cartridges and mounting the transport-use cartridges
8. Open the ink cartridge cover at the right-hand side of the printer.
9. Remove all four ink cartridges by sliding them gently along their respective rails in
the ink holder.
10. Mount the transport cartridges.
There are two types: one for the black ink, and the other for the three colored inks.
Mount the cartridge for the black ink at the leftmost position in the ink holder by
sliding it along the rail until it clicks into place. There is no position specification for
the color cartridges. Mount one cartridge in each of the three empty positions in the
ink holder by sliding it along the rail until it clicks into place.
11. Place the ink cartridges that were removed in the box that contained the transport
cartridges.
When the printer has arrived at its destination, promptly remove the transport
cartridges and replace them with the ink cartridges that were removed prior to
transporting the printer.
Removing the roll paper cutter
12. Open the printer's center cover.
13. While pressing down on the lock tab on the roll paper cutter, pull out the cutter from
the cutter holder.
Lock tab
Cutter holder
