3-7
not be performed correctly. Make sure that that the paper edges at both the left
and right sides of the roll are flush with the core.
Roll paper
Roll paper core
Roll paper
Roll paper edges
The roll paper edges are
flush with the core
The roll paper edges are
not flush with the core
Uneven roll paper take-up
3. Check that the access door is closed.
If it is open, close it.
Access door
4. Insert the roll paper stocker holding the roll into the stocker holders, making sure that
the flange is at the right.
Stocker holders
Flange
5. Pull a length of paper out from the roll, making sure that the left and right sides are
pulled out evenly. Next, while making sure that there is no slack in the roll, place
your hands on the areas indicated by a black circle (
●
) in the figure below and guide
the leading edge of the paper into the paper feed slot until it contacts the feed rollers
inside the printer.
A "beep" sound is emitted, and the roll paper is loaded automatically.
