GRAPHTEC JW220-06 Скачать руководство пользователя страница 16

Страница: 16 / 119

PREFACE

Thank you for choosing the Graphtec JW220-06 inkjet printer.

Please read this manual thoroughly before attempting to use your new product to

ensure that you use it safely and correctly.

Notes on this Manual

(1) No part of this publication may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, without the prior written permission of

Graphtec Corporation.

(2) The product specifications and other information in this manual are subject to

change without notice.

(3) While every effort has been made to provide complete and accurate information,

please contact your sales representative or nearest Graphtec vendor if you find any

unclear or erroneous information or wish to make other comments or suggestions.

(4) Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation

assumes no liability for damages resulting from either the use of the information con-

tained herein or the use of the product.

Registered Trademarks

All names of companies, brands, logotypes, and products appearing in this manual are

the trademarks or registered trademarks of their respective companies.

Copyright

This User's Manual is copyrighted by Graphtec Corporation.

Precautions to Observe When Transporting the Printer

Be sure to read Section 5.8, "Precautions on Transporting the Printer" before transport-

ing the printer to another destination. Do not transport the printer as is, as there is a

possibility of the ink leaking out. If you have any questions or if anything is unclear,

please contact your sales representative or nearest Graphtec vendor.

Содержание JW220-06
























































































































Результаты поиска

Содержание JW220-06

Отзывы:

Похожие инструкции для JW220-06

Бренды по названию

Популярные бренды

GRAPHTEC JW220-06, Руководство пользователя

Результаты поиска

Содержание JW220-06

Отзывы:

Похожие инструкции для JW220-06

Бренды по названию

Популярные бренды