3-17
Manual feeding
Paper can still be fed into the printer manually even if the A2-size paper feed cassette
has been installed. In this case, paper that is fed manually is given priority. Insert sheets
for manual feeding one at a time.
IMPORTANT
• To obtain high quality printed results, be sure to use Graphtec-supplied paper.
• Make sure that the printing surface of the paper for manual feeding is face-
down. When loading the paper, try to avoid touching the printing surface di-
rectly with your hands.
Fingerprints on the printing surface will adversely affect ink adhesion.
• Take care not to cut your fingers on the edges of the paper.
• When using the manual paper feed function to perform printing, set the number
of sheets for printing to "1" in the printer driver. If the number of sheets has
been set to a multiple number, the paper loaded in the cassette will be used for
printing the second and subsequent sheets.
1. Press the printer's [POWER] button to turn on the printer.
Check that the [POWER] button LED lights blue.
Note: Immediately after the power is turned on, the printer performs an initialization
operation. Wait until the initialization operation has been completed before
proceeding with the paper loading operation.
2. Check the orientation of the sheet and that the printing surface is face-down, and
then align the left edge of the sheet with the paper guide on the paper guide table.
Next, while lightly holding down the sheet, insert its leading edge into the paper feed
slot until it contacts the feed rollers inside the printer.
A "beep" sound is emitted, and the cut sheet is loaded automatically.
