GRAPHTEC FC5100A-100, Руководство пользователя

Страница: 87 / 201

Advanced Functions and Settings: AXIS ALIGNMENT - Axis Alignment Parameter Setting
87
• Press the ENTER key to store the setting.
The following menu appears:
If the distance between point 1 and point 2 is unknown, press the ENTER key to
skip to the next step.
If the distance between point 1 and point 2 is a known value, use the POSITION
key to change the distance value to that of the printed image, i.e., the distance
between point 1 and point 2. The measured distance is shown on the 3
rd
row. Set
the actual distance on the 4
th
row.
• Press the RIGHT or LEFT ARROW key to move the cursor.
• Press the UP or DOWN key to increase or decrease the number for the dis-
tance value.
• Press the ENTER key to store the setting.
The following menu appears:
Use the POSITION key to change the distance value to that of the printed
image, i.e., the distance between point 1 and point 3.
• Press the RIGHT or LEFT ARROW key to move the cursor.
• Press the UP or DOWN key to increase or decrease the number for the dis-
tance value.
• Press the ENTER key to store the setting.
The following menu appears:
The loupe moves back to the Axis Point 1.
If the Axis Point 1 is not the origin point of the pre-printed image, press the
POSITION key to move the loupe to the desired origin point for cutting.
DISTANCE
POINT 1-2
00399.6 mm .
OK? .......... 00400.0 mm .
DISTANCE
POINT 1-3
00399.6 mm .
OK? .......... 00400.0 mm .
AXIS ORIGIN POINT
.
X= ... mm
Y= .... mm