GRAPHTEC FC5100A-100, Руководство пользователя

Страница: 152 / 201

Test Modes and Troubleshooting: DATA DUMP - Using the Character Dump Mode
152
DATA DUMP - Using the Character Dump Mode
This mode enables experienced users to detect the exact cause of communica-
tion problems between the plotter and the computer. In character dump mode, the
plotter produces an exact print-out of the codes reaching the plotter.
NOTE: When the plotter receives READ commands that instruct it to output data, it will
output dummy data (except in the case of READ commands that request the
output of the plotter’s status data). Note that printing in dump mode will be
based on that dummy data.
If the cutting/plotting results are not what you expected, but the received data
and the transmitted program are identical, recheck the program at the computer.
If the cutting/plotting results are not what you expected, and the received data
and the transmitted program are different, check the interface conditions and the
connection of the interface cable.
WARNING: The pen starts moving as soon as the data is transmitted to the plotter
from the computer. To avoid injury to yourself and damage to the plotter,
keep your hands, face and other obstacles out of the vicinity of the cut-
ting mat and paper.
CAUTION: Mounting the cutter pen for this mode may cause fatal damage to the cutting
mat. Be sure to mount the plotter pen.
Load paper larger than either ISO (A4) or Letter size (11” x 8½”) and mount the
plotter pen.
• Press the MENU key to select MENU mode.
• Press the NEXT key three times.
• Press the F4 key to select OPTION 2.
• Press the F4 key to select TEST.
• Press the F4 key to select DATA DUMP.
BACKGROUND SETTINGS>
*
OPTION 1>
*
OPTION 2>
*
INITIAL DOWN FORCE>
*
DISTANCE ADJUST>
*
TEST>
*
CONDITON LIST>
*
SELF TEST>
*
DATA DUMP>
*