Grandstream Networks UCM6200 Series, Руководство пользователя

Страница: 212 / 469

P a g e | 211
UCM6200 Series User Manual
Version 1.0.20.38
•
Click on "Blacklist" to configure blacklist for all inbound routes.
•
Click on to edit the inbound route.
•
Click on to delete the inbound route.
Inbound Rule Configurations
Table 60: Inbound Rule Configuration Parameters
Trunks Select the trunk to configure the inbound rule.
Pattern
•
All patterns are prefixed with the "_".
•
Special characters:
X : Any Digit from 0-9.
Z : Any Digit from 1-9.
N : Any Digit from 2-9.
" . ": Wildcard. Match one or more characters.
" ! ": Wildcard. Match zero or more characters immediately.
Example: [ 12345-9 ] - Any digit from 1 to 9.
There are two pattern fields: Pattern and CallerID Pattern .
Pattern : Specifies the pattern that the dialed number must satisfy to use the
inbound route. Example: if the pattern is "_2xxx", the dialed number must be
a four-digit number that starts with 2 in order for this route to be used.
CallerID Pattern : Specifies the callerID pattern that callers must satisfy to
use the inbound route. Example: if the callerID pattern is "_1234", only
callers with a CID of 1234 can use this route.
Notes:
▪ Multiple patterns can be used. Each pattern should be entered in new
line.
▪ Users can add comments to the end of patterns to better organize and
keep track of complex rules by typing “/*” and “*/” before and after each
comment, respectively.
▪ Example:
Pattern CallerID Pattern
_X.
_NNXXNXXXXX /* 10-digit long distance */
_818X. /* Any number with leading 818 */
1000
1001