Grandstream Networks UCM6200 Series, Руководство пользователя, Страница: 147 / 469

P a g e | 146
UCM6200 Series User Manual
Version 1.0.20.38
Auto Record
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files can be accessed under Web
GUI
→ CDR → Recording Files .
Skip Trunk Auth
•
If set to ‘ Yes ’, users can skip entering the password when making
outbound calls.
•
If set to ‘ By Time ’, users can skip entering the password when making
outbound calls during the selected time condition.
•
If set to ‘ No ’, users will be asked to enter the password when making
outbound calls.
Time Condition for Skip
Trunk Auth If ‘Skip Trunk Auth’ is set to ‘By Time’, select a time condition during which
users can skip entering password when making outbound calls.
Dial Trunk Password Configure personal password when making outbound calls via trunk.
Support Hot-Desking Mode
If enabled, SIP Password will accept only alphabet characters and digits.
Auth ID will be changed to the same as Extension.
Enable LDAP If enabled, the extension will be added to LDAP Phonebook PBX list.
Enable WebRTC Support Enable registration and call from Web RTC.
Music On Hold
Specify which Music On Hold class to suggest to the bridged channel when
putting them on hold.
Enable Seamless Transfer Enable the seamless transfer for this extension.
Permission Set the permission for this extension when using the seamless transfer
Call Duration Limit The maximum duration of call-blocking.
Maximum Call Duration
The maximum call duration (in seconds). The default value 0 means no
limit.
Custom Call-info for Auto
Answer If enabled, when a call is sent to this extension from UCM, the SIP
INVITE message will contain a Call-info header indicating auto answer.
Enable Call Waiting
If disabled, UCM will not ring the extension if it is already in a call and will
give the caller a busy response.
Table 35: SIP Extension Configuration Parameters – Specific Time
Specific Time
Time Condition Click to add Time Condition to configure specific time for this extension.
Create New IAX Extension
The UCM6200 supports Inter-Asterisk eXchange (IAX) protocol. IAX is used for transporting VoIP telephony
sessions between servers and terminal devices. IAX is like SIP but also has its own characteristic. For more
information, please refer to RFC 5465.