Grandstream Networks UCM6200 Series, Руководство пользователя

Страница: 159 / 469

P a g e | 158
UCM6200 Series User Manual
Version 1.0.20.38
•
None : Disable Fax.
•
Fax Detect : Fax signal from the user/trunk during the call can be detected and
the received Fax will be sent to the Email address configured for this extension.
If no Email address can be found for the user, the Fax will be sent to the default
Email address configured in Fax setting page under Web GUI
→ Call
Features → Fax/T.38 .
ACL Policy
Access Control List manages the IP addresses that can register to this extension.
•
Allow All : Any IP address can register to this extension.
Local Network Address: Only IP addresses in the configured network segments
can register to this extension.
Enable T.38
UDPTL
Enable or disable T.38 UDPTL Support.
Skip Trunk Auth
If enable “All”, users do not need to enter password when making an outbound call. If
enable “Follow Me”, the user can dial out via follow me without password.
Codec Preference
Select audio and video codec for the extension. The available codecs are: PCMU,
PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, iLBC, ADPCM, LPC10, H.264,
H.265, H.263, H.263p and VP8.
Batch Add IAX Extensions
Under Web GUI → Extension/Trunk → Extensions , click on “Add”, then select extension type as IAX Extension
and the add method to be Batch.
Table 45: Batch Add IAX Extension Parameters
General
Start Extension Configure the starting extension number of the batch of extensions to be added.
Create Number Specify the number of extensions to be added. The default setting is 5.
Permission
Assign permission level to the user. The available permissions are “Internal”, “Local”,
“National” and “International” from the lowest level to the highest level. The default
setting is “Internal”.
Note: Users need to have the same level as or higher level than an outbound rule’s
privilege in order to make outbound calls from this rule.
Voicemail
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
•
Disable Voicemail : Disable Voicemail.
•
Enable Local Voicemail : Enable voicemail for the user.
SIP/IAX Password
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.
•
User Random Password.
A random secure password will be automatically generated. It is recommended