Grandstream Networks GXW4248 Скачать руководство пользователя страница 50

Страница: 50 / 54

FIRMWARE 1.0.3.4

GXW4248 USER MANUAL

PAGE 50 OF 54

SOFTWARE UPGRADE

Software upgrade can be done via either TFTP or HTTP/HTTPS. The corresponding configuration

settings are in the ADVANCED SETTINGS configuration page.

FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS

To upgrade via TFTP or HTTP/HTTPS, the “Firmware Upgrade and Provisioning upgrade via” field needs

to be set to TFTP HTTP or HTTPS, respectively. “Firmware Server Path” needs to be set to a valid URL

of a TFTP or HTTP server, server name can be in either FQDN or IP address format. Here are examples

of some valid URL.

e.g.

firmware.mycompany.com:6688/Grandstream/1.0.7.6

e.g.

firmware.grandstream.com

NOTES:



Firmware upgrade server in IP address format can be configured via IVR. Please refer to the

CONFIGURATION GUIDE section for instructions. If the server is in FQDN format, it must be set

via the web configuration interface.



Grandstream recommends end-user use the Grandstream HTTP server. Its address can be found

http://www.grandstream.com/support/firmware

. Currently the HTTP firmware server URL is

firmware.grandstream.com. For large companies, we recommend to maintain their own TFTP/

HTTP/HTTPS server for upgrade and provisioning procedures.



Once a “Firmware Server Path” is set, user needs to update the settings and reboot the device. If

the configured firmware server is found and a new code image is available, the GXW will attempt

to retrieve the new image files by downloading them into the GXW420x ’s SRAM. During this

stage, the GXW’s LEDs will blink until the checking/downloading process is completed. Upon

verification of checksum, the new code image will then be saved into the Flash. If

TFTP/HTTP/HTTPS fails for any reason (e.g. TFTP/HTTP/HTTPS server is not responding, there

are no code image files available for upgrade, or checksum test fails, etc), the GXW will stop the

TFTP/HTTP/HTTPS process and simply boot using the existing code image in the flash.



Firmware upgrade may take as long as 15 to 30 minutes over Internet, or just 5 minutes if it is

performed on a LAN. It is recommended to conduct firmware upgrade in a controlled LAN

environment if possible. For users who do not have a local firmware upgrade server,

Grandstream provides a NAT-friendly TFTP server on the public Internet for firmware upgrade.

Содержание GXW4248























































Результаты поиска

Содержание GXW4248

Отзывы:

Похожие инструкции для GXW4248

Бренды по названию

Популярные бренды

Grandstream Networks GXW4248, Руководство пользователя

Результаты поиска

Содержание GXW4248

Отзывы:

Похожие инструкции для GXW4248

Бренды по названию

Популярные бренды