Grandstream Networks GXW4248 Скачать руководство пользователя страница 39

Страница: 39 / 54

FIRMWARE 1.0.3.4

GXW4248 USER MANUAL

PAGE 39 OF 54

Proxy-Require

A SIP Extension to notify the SIP server that the phone is behind a NAT/Firewall.

SIP Settings - Basic Settings

SIP transport

User can select UDP or TCP or TLS. Please make sure you’re SIP Server or network

environment supports SIP over the selected transport method. Default is UDP.

SIP Registration

This parameter controls whether the GXW4248 needs to send REGISTER messages to the

proxy server. The default setting is “Yes”.

Unregister on

Reboot

Default is

. If set to “Yes”, the SIP user’s registration information is cleared on reboot.

Outgoing Calls

Without

Registration

Default is

. If set to “Yes,” user can place outgoing calls even when not registered (if

allowed by Internet Telephone Service Provider) but is unable to receive incoming calls.

Any port, member of a Hunting Group that is not registered with a SIP account, will be able to

place outbound calls using the SIP credentials of the primary Hunting Group port.

For example: Port 1, 3 and 5 are members of the same Hunting Group. Port 1 is registered

with a SIP account. Ports 3 and 5 are not registered. Ports 3 and 5 will be able to place

outbound calls using the SIP account of port 1, even if

Outgoing Call without Registration

set to No

Register

Expiration

Allows the user to specify the time frequency (in minutes) for the GXW4248 to refresh its

registration with the specified registrar. The default interval is 60 minutes (or 1 hour). The

maximum interval is 65535 minutes (about 45 days).

SIP Registration

Failure Retry Wait

Time

Allows the user to specify the time frequency (in seconds) for the GXW4248 to re-register after

registration failure. The default interval is 20 seconds. The maximum interval is 3600 seconds

(1 hour).

Reregister Before

Expiration

Determines how many seconds before the previous registration expires that the port should

reregister.

Local SIP Port

Defines the local SIP port the GXW4248 will listen and transmit. The default value for Profile 1

is 5060 and 6060 for Profile 2.

Use Random SIP

Port

Default is

. If set to Yes, the device will pick randomly-generated SIP ports. This is usually

necessary when multiple GXW4248/HT50X are behind the same NAT.

SIP T1 Timeout

T1 is an estimate of the round-trip time between the client and server transactions.

If the network latency is high, select larger value for more reliable usage.

SIP T2 Timeout

Maximum retransmission interval for non-INVITE requests and INVITE responses.

Содержание GXW4248























































Результаты поиска

Содержание GXW4248

Отзывы:

Похожие инструкции для GXW4248

Бренды по названию

Популярные бренды

Grandstream Networks GXW4248, Руководство пользователя

Результаты поиска

Содержание GXW4248

Отзывы:

Похожие инструкции для GXW4248

Бренды по названию

Популярные бренды