Grandstream Networks GXW4248 Скачать руководство пользователя страница 41

Страница: 41 / 54

FIRMWARE 1.0.3.4

GXW4248 USER MANUAL

PAGE 41 OF 54

UAC Specify

Refresher

As a Caller, select UAC to use the phone as the refresher, or UAS to use the Callee or proxy

server as the refresher.

UAS Specify

Refresher

As a Callee, select UAC to use caller or proxy server as the refresher, or UAS to use the phone

as the refresher.

Force INVITE

Session Timer can be refreshed using INVITE method or UPDATE method. Select “Yes” to use

INVITE method to refresh the session timer.

SIP Settings - Security Settings

Validate Incoming

Messages

Defines whether the incoming messages will be validated.

Check SIP User ID

for Incoming

INVITE

If set to "Yes", SIP User ID will be checked in the Request URI of the incoming INVITE. If it

doesn't match the phone's SIP User ID, the call will be rejected. Direct IP calling will also be

disabled.

Accept Incoming

SIP from Proxy

Only

If set to "Yes", SIP User ID will be checked in the Request URI of the incoming INVITE. If it

doesn't match the phone's SIP User ID, the call will be rejected. Direct IP calling will also be

disabled.

Authenticate

Incoming INVITE

If set to "Yes", the phone will challenge the incoming INVITE for authentication with SIP 401

Unauthorized response.

Fax Settings

Fax Mode

T.38 (Auto Detect) FoIP by default, or Pass-Through (must use codec PCMU/PCMA)

Fax Tone

Detection Mode

Default is

Callee

This decides whether Caller or Callee sends out the re-INVITE for T.38 or

Fax Pass Through.

Send Re-INVITE

After Fax

Completion

Default is

, If set to “Yes”, device will send an INVITE with audio vocoders upon completition

of Fax to continue session in audio only.

Send Re-INVITE

After Fax Tone

If set to “Yes”, device will send an Re-INVITE after Fax tone is detected, disabling will only work

under Broadsoft feature.

Enable Silence

Detection for Fax

Disconnect

For fax machines that do not send a Disconnect when fax is done. This option

Enables/Disables the detection of silence in order to know the fax has finished. The silence

period is non-configurable and fixed to 7 seconds.

Audio Settings

Содержание GXW4248























































Результаты поиска

Содержание GXW4248

Отзывы:

Похожие инструкции для GXW4248

Бренды по названию

Популярные бренды

Grandstream Networks GXW4248, Руководство пользователя

Результаты поиска

Содержание GXW4248

Отзывы:

Похожие инструкции для GXW4248

Бренды по названию

Популярные бренды