FIRMWARE 1.0.3.4
GXW4248 USER MANUAL
PAGE 19 OF 54
Examples:
1. Dial a number (e.g. (626) 666-7890), first enter the prefix number (usually 1+ or international
code) followed by the phone number. Press # or wait for 4 seconds. Check with your VoIP
service provider for further details on prefix numbers.
DIRECT IP CALLS
Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another VoIP Device, to
talk to each other in an ad hoc fashion without a SIP proxy.
Elements necessary to completing a Direct IP Call:
1. Both GXW4248 and other VoIP Device, have public IP addresses, or
2. Both GXW4248 and other VoIP Device are on the same LAN using private IP addresses, or
3. Both GXW4248 and other VoIP Device can be connected through a router using public or private
IP addresses (with necessary port forwarding or DMZ).
GXW4248 supports two ways to make Direct IP Calling:
Using IVR
1. Pick up the analog phone then access the voice menu prompt by dial “
***
”
2. Dial “
047
” to access the direct IP call menu
3. Enter the IP address using format ex.
192*168*0*160
after the dial tone.
Using Star Code
1. Pick up the analog phone then dial “
*47
”
2. Enter the target IP address using same format as above.
Note:
NO
dial tone will be played between step 1 and 2.
Destination ports can be specified by using “
*
” (encoding for “:”) followed by the port number.
Examples:
a) If the target IP address is 192.168.0.160, the dialing convention is
*47 or Voice Prompt with option 047, then 192*168*0*160.
followed by pressing the “#” key if it is configured as a send key or wait 4 seconds. In this case,
the default destination port 5060 is used if no port is specified.
b) If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be:
