Grandstream Networks GXW4248 Скачать руководство пользователя страница 49

Страница: 49 / 54

FIRMWARE 1.0.3.4

GXW4248 USER MANUAL

PAGE 49 OF 54

REBOOTING FROM REMOTE

Press the “Reboot” button at the bottom of the configuration menu to reboot the phone remotely. The web

browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in

again.

CONFIGURATION THROUGH A CENTRAL SERVER

Grandstream GXW4248 can be automatically configured from a central provisioning system.

When GXW4248 boots up, it will send TFTP or HTTP/HTTPS requests to download configuration files,

“cfg000b82xxxxxx” and “cfg00082xxxxxx.xml”, where “000b82xxxxxx” is the LAN MAC address of the

GXW4248. If the download of “cfgxxxxxxxxxxxx.xml” is not successful, the provision program will issue

request a generic configuration file “cfg.xml”. Configuration file name should be in lower case letters.

The configuration data can be downloaded via TFTP or HTTP/HTTPS from the central server. A service

provider or an enterprise with large deployment of GXW4248 can easily manage the configuration and

service provisioning of individual devices remotely from a central server.

Grandstream provides a central provisioning system GAPS (Grandstream Automated Provisioning

System) to support automated configuration of Grandstream devices. GAPS uses enhanced (NAT

friendly) TFTP or HTTP (thus no NAT issues) and other communication protocols to communicate with

each individual Grandstream device for firmware upgrade, remote reboot, etc.

Grandstream provides GAPS service to VoIP service providers. Use GAPS for either simple redirection

or with certain special provisioning settings. At boot-up, Grandstream devices by default point to

Grandstream provisioning server GAPS, based on the unique MAC address of each device, GAPS

provision the devices with redirection settings so that they will be redirected to customer’s TFTP or

HTTP/HTTPS server for further provisioning.

Grandstream also provides configuration tools (Windows and Linux/Unix version) to facilitate the task of

generating device configuration files. The Grandstream configuration tools are free to end users. The

configuration tools and configuration templates are available for download from

http://www.grandstream.com/support/tools

Содержание GXW4248























































Результаты поиска

Содержание GXW4248

Отзывы:

Похожие инструкции для GXW4248

Бренды по названию

Популярные бренды

Grandstream Networks GXW4248, Руководство пользователя

Результаты поиска

Содержание GXW4248

Отзывы:

Похожие инструкции для GXW4248

Бренды по названию

Популярные бренды