Grandstream Networks GXW4248 Скачать руководство пользователя страница 52

Страница: 52 / 54

FIRMWARE 1.0.3.4

GXW4248 USER MANUAL

PAGE 52 OF 54

FIRMWARE AND CONFIGURATION FILE PREFIX AND POSTFIX

Firmware Prefix and Postfix allows device to download the firmware name with the matching Prefix and

Postfix. This makes it possible to store ALL of the firmwares with different version in one single directory.

Similarly, Config File Prefix and Postfix allows device to download the configuration file with the matching

Prefix and Postfix. Thus multiple configuration files for the same device can be stored in one directory.

In addition, when the field “Check New Firmware only when F/W pre/suffix changes” is selected, the

device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.

MANAGING FIRMWARE AND CONFIGURATION FILE DOWNLOAD

When “Automatic Upgrade” is set to “Yes”, Service Provider can use P193 to have the devices

periodically check with either Firmware Server or Config Server, whenever they are defined. This allows

the device periodically check whether there is any new changes need to be taken, similar to the AntiVirus

Software to upgrade the Virus Definition files. Screenshot is below:

Automatic Upgrade:

Yes, every

10080

minutes(60-5256000).

Yes, daily at hour

(0-23).

Yes, weekly on day

(0-6).

Содержание GXW4248























































Результаты поиска

Содержание GXW4248

Отзывы:

Grandstream Networks GXW4248, Руководство пользователя, Страница: 52 / 54

Результаты поиска

Содержание GXW4248

Отзывы: