Grandstream Networks GXW4248 Скачать руководство пользователя страница 46

Страница: 46 / 54

FIRMWARE 1.0.3.4

GXW4248 USER MANUAL

PAGE 46 OF 54

Use # as Dial Key

Allows users to configure the “#” key as the “Send” (or “Dial”) key. If set to “Yes”, “#” will send

the number. In this case, this key is essentially equivalent to the “Dial” key. If set to “No”, this

“#” key can be included as part of number.

No Key Entry

Timeout

Default is

4 seconds

. Call will be completed within this time interval if no additional key entry

occurs.

Off-Hook Auto-

Dial Delay

Determines how many seconds after off-hook to wait before autodialing the extension set under

Advanced Port Settings. The range is 0 to 60 seconds.

Enable Call

Features

Default is

Yes

. (If Yes, call features using star codes will be supported locally)

Disable Call

Waiting

Default is

. If set to

YES

Call Waiting indication information will not be provided to analog

phone connected to this FXS port.

Disable Call

Waiting Caller ID

Default is

. If set to

YES

Call Waiting caller ID will not be provided to analog phone

connected to this FXS port.

Disable Call

Waiting Tone

Default is

. This is to disable the stutter Call Waiting Tone when a Call Waiting call arrives.

The CWCID will still be displayed.

Disable Receiver

Offhook Tone

Default is

. If

YES

, ROH tone will not be played after off hook for 60 seconds.

Disable Reminder

Ring for On-Hold

Call

Default is

. This is to disable the Reminder Ring that is played when a call is waiting on hold

and the analog phone goes on-hook.

Disable Visual

MWI

Visual message indicator is a special on-hook caller ID type message that enables and

disables the message waiting light on certain phones. GXW4248 has this feature enabled by

default. However, certain phones (rare) that do not support it may mistakenly treat this CID

signal as an incoming call. A configuration option is needed to turn on MWI in this case.

Visual MWI Type

This is the type of signal sent to the analog phone to make it turn the lamp ON upon receiving a

Voice mail. Check the phone’s manual to find out what signal is supported, FSK (default) or

Neon.

Transfer on

Conference

Hangup

Defines whether the call is transferred to the other party if the conference initiator hangs up.

Disable Bellcore-

style 3-Way

Conference

Disable Bellcore-style 3-Way Conference

Содержание GXW4248























































Результаты поиска

Содержание GXW4248

Отзывы:

Grandstream Networks GXW4248, Руководство пользователя, Страница: 46 / 54

Результаты поиска

Содержание GXW4248

Отзывы: